BioFuel Beat – Local Application for Leading European Biogas Technology

By Erik Vandist, Renewable Energy Division Manager, Trimark Engineering

Europe is a world leader in the development of advanced renewable energy technologies. In the early summer of 2009, a delegation from Lethbridge, Alberta-based Trimark Engineering toured a biogas facility near Venice, Italy. The purpose of the visit was to investigate an advanced biogas technology suitable for applications in Canada. The process was developed by Austrian based ‘enbasys’, a company specialized in biotech energy. Markus Grasmug, Chief Technology Officer of ‘enbasys’ led the facility tour.

The facility operates on the principles of composting and anaerobic digestion. Anaerobic digestion is a biochemical process where, in the absence of oxygen, bacteria decompose organic matter to produce biogas. The organic matter used as feedstock for the Venice facility consists of municipal solid waste and residues from food industries. The biogas is used as a fuel source for generators that feed power onto the utility grid. By-products of the process consist of compost and water.

The facility is jointly owned by a private investor and the local municipality. It is located in a rural area, adjoining two villages. The operation receives organic waste by truck from a 150 km radius containing a population of 2.5 million. Approximately 400,000 tonne of waste is processed annually. Given the proximity of the facility to the nearby villages, odour control is critical. Buildings handling organic waste are tightly sealed. Ventilation air is exhausted through bio-filters. The bio-filters consist of wood and bark collected from the retention filters at the entrance of hydro power stations. The bio-filters were effective. In spite of the hot weather, during the visit no waste odours were detected outside of the processing facilities.

On arrival, the trucks are weighed and directed into the receiving area of the waste processing building. The waste material is unloaded onto the floor. Front-end loaders are used to rough sort industrial and municipal organic materials and to load the conveyor feeding the processing equipment. Processing consists of screening and grinding which separates foreign materials and then shreds and screens the waste to the appropriate size for stable digestion performance. A substrate, which is a mix of prepared waste, is then pumped to the two digesters, each holding 2,900 m³

The methane gas produced in the digesters is fed to three cogeneration units. The cogeneration units feed 4.0 to 4.5 megawatts of electricity to the utility grid. Waste heat from the cogeneration units is recovered and directed by a common pipeline to the hospital, school and a number of homes in the neighbouring villages.

Mr. Grasmug indicated that the ‘enbasys’ technology is the culmination of over 10 years of research and development. This technology provides an efficient, compact, reliable, low maintenance process at a low operating cost compared to conventional technologies. The technology is capable of efficiently handling both varying volume streams and complex substrates with high chemical oxygen demand.

The digesters at the Venice facility have operated continuously since the initial commissioning in 2005. The unique design of the digesters provides low retention times and no foaming issues. The digesters operate without the need for microbiological substrate additives, enzyme additives or pH adjustments. These characteristics enable the use of smaller, less costly vessels than other systems.

The residue from the digesters is transferred to a centrifuge to separate the solid and liquid phases. The solids are composted for use as fertilizer. The liquid is treated in a membrane bioreactor to purify the water to potable quality. This water is recycled for process requirements including maintaining the bio-filter moisture level. Yearly, 140,000 tonnes of fertilizer and 80 million litres of clean water are produced from waste. Only 15% of the total input is land-filled.

According to Grasmug, the capacity of the ‘enbasys’ system is easily sized for adaption to local availability and type of feedstocks. The design is scalable to installations as small as 10 kW. The effectiveness of the system for specific applications can be verified using the company’s portable demonstration plant.

Beyond municipal waste applications, the technology is well suited to integration with processing operations. These include food and sugar beet processors, breweries, potato growers and other agriculture-based industries. A favourable business case may be made for system capacities of less than 500 kW.

The ‘enbasys’ technology also provides the opportunity to address the disposal and pollution concerns associated with animal waste. Manure from livestock operations can be converted into useful energy and sterile fertilizer. The ‘enbasys’ technology will efficiently process cattle manure, which is normally a barrier to conventional technologies due to the high content of straw and sand.

There are ample opportunities to apply biogas technologies to address both waste and energy challenges in Canada. Although North American developed technologies are emerging, the learning curve is steep. The Venice facility tour confirmed specific advantages of European biogas technology for applications in Canada. These advantages include adaptability of size for decentralized applications and low operating costs. As the next step to verify effectiveness and economics,

Trimark Engineering will coordinate trials of the “enbasys” technology in Canada. Federal and provincial government grant programs provide financial incentives for investment in alternate energy initiatives including biogas. These incentives will support the increased use of biogas technologies to reduce greenhouse gas emissions and address other environmental concerns.

About the author: Erik Vandist is the Manager of Biofuels and Renewable Energy at Trimark Engineering. Based in Lethbridge, Alberta, Trimark Engineering specializes in process design for the industrial agricultural, food processing and renewable energy sectors. Currently the company is involved in a number of renewable energy projects including integrated biodiesel facilities. For further information regarding biogas technology, please contact Erik at erik@trimarkeng.com or (866) 328-2910.

Advertisements

One Response to “BioFuel Beat – Local Application for Leading European Biogas Technology”

  1. John Says:

    Congrats to TriMark and there approach to such a beneficial technology.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: